Congratulations on your new bicycle purchase!

Unboxing and Inspection

Carefully unpack the bicycle and its components. Avoid Sharp knife for unboxing and ensure to wear gloves if possible.

Wheel Installation

Insert the front wheel into the fork dropouts, ensuring it's fully seated.

Tighten the quick-release skewer or axle nuts

Handle Bar Installation

Attach the handlebars to the stem, aligning them with the front wheel.

Tighten the handlebar clamp bolts evenly to secure the handlebars in place.

Component Installation

Install the seatpost into the seat tube, adjusting the height to your preference and tightening the seat clamp.

Attach the saddle to the seatpost, ensuring it's level and securely tightened.

Install the pedals, remembering that the right pedal (R) screws in clockwise and the left pedal (L) screws in counterclockwise.

Install any additional components such as fenders, racks, or accessories according to your Preferred position

Safety Checks

Double-check all bolts and fasteners to ensure they are properly tightened.

Inspect the brakes, ensuring they are adjusted and aligned correctly.

Check the tire pressure using a bicycle pump, inflating them by pressing the tyre. (Using Machine PSI values is not Recommended as it might not be accurate at shops).

Conduct a final visual inspection of the entire bicycle to ensure everything is fitted.

Safety Measures

Wear appropriate safety gear throughout the assembly process, including gloves and protective eyewear.

Take breaks as needed to prevent fatigue and maintain focus.

If you encounter any difficulties or uncertainties during assembly, check with the video tutorials provided below.

Conclusion:

By following these step-by-step instructions and prioritizing safety measures, you can confidently assemble your bicycle purchased online. Remember to take your time, double-check your work, and enjoy the satisfaction of riding your newly assembled bike!